LCD Display Repair Service for Raymarine Autohelm ST50 / ST50 Plus Tridata Z089 Z132
If you are experiencing a Fading Display, Missing Segments or a Sun-Damaged LCD on your Autohelm ST50 / ST50 Plus Tridata marine instrument, it is time to restore a clear, readable display! This listing is for the purchase of (1) REPAIR SERVICE to replace the LCD in your original compatible instrument. You must mail your instrument to us for repair. A complete replacement instrument is not included.
Why replace your original equipment when its display can be repaired? The internal LCD will be replaced with a Brand New replacement screen while retaining your original instrument electronics, housing and keypad. LCD replacement does not normally require programming; existing calibration and SeaTalk configuration remain on the original circuit board unless the instrument is reset.
Typical Problems That Require Our Service:
- Faded or low-contrast display characters
- Missing or distorted segments caused by a defective LCD
- Sunburned, darkened or discolored LCD
- Blotches or damage within the LCD glass
- Display becomes difficult to read as it warms up
- Note: This service covers LCD replacement only. Power faults, circuit board failures, water damage or corrosion, backlight faults, keypad faults, SeaTalk communication problems, transducer faults and incorrect sensor readings are not included.
Service is for the Following Models:
- Autohelm - ST50 Tridata and ST50 Plus Tridata with the matching black housing and LCD
- Raytheon / Raymarine - ST50 Tridata variations using the same housing and LCD
- Reference instrument assemblies: Z089 and Z132, subject to physical LCD fitment verification
Please compare your instrument with the listing photos. The original LCD must match the approximately 85 × 53 mm screen, segment layout, glass shape and electrical contact positions. This service does not cover ST60, ST60+, i50 Tridata, Depth-only, Speed-only, Wind or autopilot instruments.
HOW DOES THIS SERVICE WORK?
1.. Use Add To Cart to purchase the service for $199.95.
2.. Disconnect vessel power, then carefully remove your Tridata instrument following the manufacturer's instructions. Professional marine-electronics removal is recommended.
3.. Disconnect and label the instrument connections. Securely package the complete instrument and mail it to us. Do not send transducers or vessel wiring.
You will receive mailing instructions via email after the service is purchased and paid for. Ship your securely packaged instrument using FedEx, UPS, DHL, US Post Office or another suitable carrier. Please include your order number, a short list of symptoms and your return mailing address.
Note: Do not rely on the removed or defective instrument for vessel operation. Follow the emailed mailing instructions before shipping.
Mailing Address
German Audio Tech
Attn: Repair Dept.
65 Pine Ave., #337
Long Beach, CA 90802
