6-Pin Rear Backup Reverse Camera for 2011-2012 Ford Edge BT4Z-19G490-B
Replace a failed, intermittent, distorted, or black-screen factory rearview camera with this new aftermarket replacement. Designed for compatible Ford Edge factory backup-camera systems, this unit installs in the original rear liftgate camera location and connects to the existing wiring through its factory-style 6-pin connector.
๐ฃ๐ฟ๐ผ๐ฑ๐๐ฐ๐ ๐๐ฒ๐๐ฎ๐ถ๐น๐
โข Product type: Rearview backup parking camera ย
โข Condition: New ย
โข Brand: Aftermarket replacement ย
โข Placement: Rear liftgate ย
โข Connection: Wired factory-style 6-pin connector ย
โข Camera type: Color camera ย
โข Housing color: Black ย
โข Intended use: Replacement for an existing factory-installed camera system ย
โข Installation style: Direct-style replacement; no universal wiring harness included ย
๐ฃ๐ฎ๐ฟ๐ ๐ก๐๐บ๐ฏ๐ฒ๐ฟ๐
โข Replacement part number: BT4Z-19G490-B ย
โข Alternate format: BT4Z19G490B ย
โข Replaces earlier Ford number: BT4Z-19G490-A ย
โข Additional marking shown on this aftermarket camera: FL1T-19G490-B ย
The FL1T number is a manufacturer marking shown on the aftermarket unit. Buyers should use BT4Z-19G490-B and the connector shown in the photographs as the primary compatibility references.
๐๐ผ๐บ๐ฝ๐ฎ๐๐ถ๐ฏ๐ถ๐น๐ถ๐๐
โข 2011 Ford Edge equipped with a factory rearview camera ย
โข 2012 Ford Edge equipped with a factory rearview camera ย
โข Certain early-production 2013 Ford Edge vehicles built through October 23, 2012 ย
Compatible trims may include SE, SEL, Limited, and Sport when originally equipped with the matching factory camera system. Compatibility depends on the vehicle build date, original camera number, connector, and equipmentโnot engine size alone.
๐๐บ๐ฝ๐ผ๐ฟ๐๐ฎ๐ป๐ ๐๐ถ๐๐บ๐ฒ๐ป๐ ๐ก๐ผ๐๐ฒ๐
โข Not recommended for 2013 vehicles built on or after October 24, 2012; these generally use ET4Z-19G490-A or a related later camera. ย
โข Not confirmed for 2014 or 2015 Ford Edge models under BT4Z-19G490-B. ย
โข This camera replaces an existing factory camera; it will not add a backup-camera system to a vehicle that was not originally equipped with one. ย
โข Compare the original part number, housing, lens position, mounting points, and 6-pin connector with the listing photographs before ordering. ย
โข Vehicle configuration or camera calibration may be required to restore factory parking guidelines or other display functions. ย
โข Image orientation and parking-guideline operation can vary when an incorrect camera version is installed.
๐ฃ๐ฎ๐ฐ๐ธ๐ฎ๐ด๐ฒ ๐๐ป๐ฐ๐น๐๐ฑ๐ฒ๐
โข One rearview backup camera ย
No mounting hardware, wiring harness, display, trim panel, or programming service is included unless specifically pictured.
๐๐ป๐๐๐ฎ๐น๐น๐ฎ๐๐ถ๐ผ๐ป
Professional installation is recommended. Disconnect the vehicle battery as directed by the manufacturer, replace the original liftgate camera, reconnect the factory wiring, and verify image orientation and guideline operation before completing reassembly.
๐๐ฒ๐ณ๐ผ๐ฟ๐ฒ ๐ข๐ฟ๐ฑ๐ฒ๐ฟ๐ถ๐ป๐ด
Please match BT4Z-19G490-B, your vehicleโs production date, and the original connector to the photographs. Supplying the VIN to a Ford parts department is the most reliable way to confirm compatibility.
