WORKPRO 22pc SAE Metric 72-Tooth Ratcheting Combination Wrench Set

𝗣𝗿𝗼𝗱𝘂𝗰𝘁 𝗗𝗲𝘁𝗮𝗶𝗹𝘀

New WORKPRO 22-piece ratcheting combination wrench set covering commonly used SAE and metric fastener sizes.

Each wrench features a conventional open end and a fixed 12-point ratcheting box end. The 72-tooth mechanism requires approximately five degrees of movement, allowing the wrench to operate in confined areas where there is not enough room for a complete rotation.

This listing is for the regular fixed-head, polished-finish version. It is not the flex-head version shown in some related WORKPRO advertisements.

𝗠𝗲𝘁𝗿𝗶𝗰 𝗦𝗶𝘇𝗲𝘀

• 6mm
• 8mm
• 9mm
• 10mm
• 12mm
• 13mm
• 14mm
• 15mm
• 16mm
• 17mm
• 18mm

Please note that this set does not include 7mm or 11mm wrenches.

𝗦𝗔𝗘 𝗦𝗶𝘇𝗲𝘀

• 1/4 inch
• 9/32 inch
• 5/16 inch
• 11/32 inch
• 3/8 inch
• 7/16 inch
• 1/2 inch
• 9/16 inch
• 5/8 inch
• 11/16 inch
• 3/4 inch

𝗞𝗲𝘆 𝗙𝗲𝗮𝘁𝘂𝗿𝗲𝘀

• Eleven metric and eleven SAE wrenches
• 72-tooth ratcheting box ends
• Approximately five-degree working swing arc
• Fixed-head design for direct force transfer
• 12-point box ends for convenient fastener engagement
• Conventional open ends for side access
• Forged chrome-vanadium steel construction
• Heat-treated for strength and durability
• Polished chrome finish for corrosion resistance
• Clearly marked wrench sizes
• Molded carrying and organizer case
• Individual marked storage positions for each wrench

𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀

• Brand: WORKPRO
• Product type: Ratcheting combination wrench set
• Number of wrenches: 22
• Measurement systems: SAE and metric
• Metric range: 6mm through 18mm with listed omissions
• SAE range: 1/4 inch through 3/4 inch
• Ratcheting mechanism: 72 tooth
• Minimum working swing: Approximately five degrees
• Box-end configuration: 12 point
• Head configuration: Fixed
• Material: Chrome-vanadium steel
• Finish: Polished chrome
• Country of origin: China
• Approximate package dimensions: 13.54 × 9.61 × 3.35 inches
• Approximate packaged weight: 6.67 pounds
• Condition: New

𝗥𝗲𝗰𝗼𝗺𝗺𝗲𝗻𝗱𝗲𝗱 𝗨𝘀𝗲𝘀

Suitable for professional, workshop and do-it-yourself applications, including:

• Automotive maintenance and repair
• Motorcycle and bicycle repair
• Machinery assembly and service
• Small-engine maintenance
• Plumbing and mechanical projects
• Equipment installation
• Garage and workshop use
• Household repairs
• Furniture and appliance assembly

𝗦𝗔𝗘 𝗔𝗻𝗱 𝗠𝗲𝘁𝗿𝗶𝗰 𝗦𝗲𝗹𝗲𝗰𝘁𝗶𝗼𝗻

SAE and metric fasteners are different measurement systems. Sizes that appear similar should not automatically be treated as interchangeable.

Always use the precisely marked wrench size required by the fastener. An incorrectly sized wrench may slip, damage the fastener or cause an injury.

Close but nonidentical sizes include:

• 1/4 inch and 6mm
• 5/16 inch and 8mm
• 3/8 inch and 10mm
• 1/2 inch and 13mm
• 9/16 inch and 14mm
• 5/8 inch and 16mm
• 11/16 inch and 17mm
• 3/4 inch and 18mm

𝗨𝘀𝗶𝗻𝗴 𝗧𝗵𝗲 𝗥𝗮𝘁𝗰𝗵𝗲𝘁𝗶𝗻𝗴 𝗘𝗻𝗱

1. Select the exact wrench size required by the fastener.

2. Fully seat the box end over the nut or bolt head.

3. Confirm the intended tightening or loosening direction before applying pressure.

4. Pull the wrench through the available working area.

5. Return the wrench without removing it from the fastener. The internal ratchet will reset for the next stroke.

6. Repeat until the fastener reaches the required position.

Turn the wrench over to reverse the operating direction when applicable to this nonreversible ratcheting design.

𝗜𝗺𝗽𝗼𝗿𝘁𝗮𝗻𝘁 𝗨𝘀𝗮𝗴𝗲 𝗡𝗼𝘁𝗲𝘀

• Fully engage the wrench before applying force.
• Use the open end only when side access is required.
• Use the box end whenever maximum fastener engagement is preferred.
• Apply steady and controlled pressure.
• Do not strike the wrench with a hammer.
• Do not attach an extension pipe or cheater bar.
• Do not use the ratcheting end as a breaker bar on severely seized fasteners.
• Loosen heavily corroded fasteners with an appropriate fixed wrench or breaker tool when necessary.
• These are hand tools and are not intended for impact use.
• Wear suitable eye protection while performing repair work.
• Inspect each wrench before use and discontinue use if damaged.

𝗙𝗶𝘅𝗲𝗱-𝗛𝗲𝗮𝗱 𝗩𝗲𝗿𝘀𝗶𝗼𝗻

This particular listing identifies the set as the regular polished version with fixed ratcheting heads.

WORKPRO also manufactures flex-head and nickel-plated versions of similar 22-piece sets. Those variations should not be used to describe this item unless the photographs and packaging show the corresponding features.

𝗖𝗮𝗿𝗲 𝗔𝗻𝗱 𝗦𝘁𝗼𝗿𝗮𝗴𝗲

Wipe each wrench clean after use. Remove oil, water, brake fluid, chemicals and other contaminants before returning the tools to the case.

Store the set in a clean, dry location. A small amount of suitable hand-tool lubricant may be applied periodically to the ratcheting mechanisms.

𝗪𝗮𝗿𝗿𝗮𝗻𝘁𝘆

The referenced eBay listing advertises a one-year manufacturer warranty. Coverage, exclusions and claim requirements are controlled by the seller or manufacturer. Retain the purchase receipt and original packaging.

𝗣𝗮𝗰𝗸𝗮𝗴𝗲 𝗖𝗼𝗻𝘁𝗲𝗻𝘁𝘀

• Eleven metric ratcheting combination wrenches
• Eleven SAE ratcheting combination wrenches
• One molded carrying and organizer case

Total wrench quantity: 22