2010-15 Audi TT TTS TT RS RNS-E 193 6.5in LED LCD Screen LT065AB3D600

$ 299.95

New replacement 6.5-inch LED-backlit LCD display panel for selected second-generation Audi Navigation Plus RNS-E “193” head units.

IMPORTANT:
This listing is for ONE internal LCD display panel only.

The complete Audi Navigation Plus radio shown in the application photos is NOT included. This is not a complete radio, navigation unit, touchscreen, control panel or faceplate.

Display information:

Screen size: 6.5 inches
Display type: Color LCD with LED backlighting
Touchscreen: No
Condition: New
Brand: Unbranded aftermarket replacement
Country of origin: China
Quantity: One LCD display panel

Display reference numbers:

LT065AB3D600
LTA065B3D0F
NEP28-AB3D0113

Compatible Audi TT-family applications:
Fits selected 2010–2015 Audi TT 8J vehicles equipped with the second-generation RNS-E Navigation Plus head unit whose Audi part number ends in “193.”

Potential applications include:

2010–2015 Audi TT Coupe and Roadster
2010–2015 Audi TTS Coupe and Roadster
Selected Audi TT RS 8J models, depending on model year and market

Confirmed head-unit reference families include:

8J0 035 193 B / 8J0035193B
8J0 035 193 D / 8J0035193D
8J0 035 193 F / 8J0035193F
Exchange/remanufactured versions such as 8J0035193BX and 8J0035193FX may also use this display, but the original screen number must be verified.

Compatibility requirements:

The navigation unit must be the later RNS-E PU/MK2 “193” generation.
Compare the number printed on the original LCD panel before ordering.
Compare the display dimensions, mounting points, ribbon cable and electrical connector with the listing photographs.
Audi vehicle year alone is not sufficient to confirm compatibility because different radios were available during the same model year.

Not compatible with:

Earlier RNS-E units with Audi part numbers ending in “192”
Earlier LCD references LTA065B090D, LTA065B091D, NEP70-AB090 or NEP70-AB091
Audi Concert or Symphony radios
BNS navigation systems
Audi MMI systems
Audi TT 8S/MK3
Any application requiring a touchscreen
Vehicles without an RNS-E Navigation Plus head unit

Typical problems this display may repair:

Cracked or damaged LCD
Dim or failed backlight
Vertical or horizontal lines
Missing pixels
Incorrect colors
Low contrast
Unreadable or blank display when the original LCD itself has failed

Please note:
Replacing the LCD will not repair faults caused by the navigation unit’s motherboard, power supply, display ribbon cable, screen mechanism or other internal electronics. Diagnose the original unit before ordering.

Installation:
The RNS-E head unit and motorized display assembly must be disassembled to install this panel. Installation normally uses the existing connectors and does not require radio coding when only the LCD is replaced. However, the panel and ribbon connections are delicate, and electrostatic-discharge precautions are required.

Professional installation by an automotive-electronics or navigation repair technician is strongly recommended. Damage caused by incorrect installation, torn ribbon cables, static electricity or incorrect compatibility may not be covered by the seller’s return policy.

Package contents:

One 6.5-inch replacement LCD display panel

Navigation unit, screen frame, motor assembly, faceplate, buttons, wiring, installation tools and instructions are not included unless specifically pictured as part of the supplied display.