2004-08 Chrysler Crossfire OEM A/C Heater Climate Control 5099162AA A1938300085

Genuine OEM dashboard-mounted heater and air-conditioning control assembly for 2004–2008 Chrysler Crossfire models. This factory control operates the cabin temperature, blower speed, airflow direction, air conditioning, recirculation and defrost functions.

Designed as a direct replacement for a Crossfire already equipped with the same control-panel configuration. Compare the part number, connector, control cables and front-panel layout before purchasing.

𝗣𝗿𝗼𝗱𝘂𝗰𝘁 𝗗𝗲𝘁𝗮𝗶𝗹𝘀

• Genuine OEM Chrysler Crossfire component
• Dashboard-mounted HVAC control assembly
• Separate driver and passenger temperature adjustment
• Factory black and silver finish
• Two rotary control knobs
• Side-mounted temperature rollers
• Electrical connector and mechanical control connections
• Direct replacement when the original configuration matches
• Used OEM component

𝗣𝗮𝗿𝘁 𝗡𝘂𝗺𝗯𝗲𝗿𝘀

• Chrysler/Mopar: 5099162AA
• Alternate Mopar format: 05099162AA
• Mercedes supplier number: A1938300085
• Alternate Mercedes format: A 193 830 00 85
• Hollander interchange: 655-01617

These numbers are commonly cross-referenced for the 2004–2008 Crossfire HVAC control. Verify the identification label on the actual unit before shipment because the seller states that representative photographs may be used.

𝗖𝗼𝗻𝘁𝗿𝗼𝗹 𝗙𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀

The assembly provides controls for:

• Blower fan speed
• Driver-side temperature
• Passenger-side temperature
• Dashboard vent airflow
• Floor-level airflow
• Windshield defrost airflow
• Air-conditioning operation
• Air recirculation
• Rear-window defrost
• Residual-heat REST function
• Climate-system off position

𝗖𝗼𝗺𝗽𝗮𝘁𝗶𝗯𝗶𝗹𝗶𝘁𝘆

Designed for the following vehicles:

• 2004 Chrysler Crossfire
• 2005 Chrysler Crossfire
• 2006 Chrysler Crossfire
• 2007 Chrysler Crossfire
• 2008 Chrysler Crossfire

𝗖𝗼𝗺𝗽𝗮𝘁𝗶𝗯𝗹𝗲 𝗕𝗼𝗱𝘆 𝗦𝘁𝘆𝗹𝗲𝘀

• Coupe
• Convertible/Roadster

𝗖𝗼𝗺𝗽𝗮𝘁𝗶𝗯𝗹𝗲 𝗠𝗼𝗱𝗲𝗹𝘀

Depending on model year and original equipment, applications include:

• Crossfire Base
• Crossfire Limited
• Crossfire SRT-6

The interchange covers naturally aspirated 3.2-liter models and applicable supercharged 3.2-liter SRT-6 models. Transmission type generally does not determine compatibility, but the original control configuration and part number must match.

𝗜𝗺𝗽𝗼𝗿𝘁𝗮𝗻𝘁 𝗙𝗶𝘁𝗺𝗲𝗻𝘁 𝗥𝗲𝗾𝘂𝗶𝗿𝗲𝗺𝗲𝗻𝘁𝘀

The vehicle must have:

• The same two-knob control-panel layout
• Matching driver and passenger temperature rollers
• Matching rear electrical connector
• Matching mechanical control connections
• Matching mounting points
• Part number 5099162AA, A1938300085 or a confirmed interchangeable number

𝗡𝗼𝘁 𝗖𝗼𝗺𝗽𝗮𝘁𝗶𝗯𝗹𝗲 𝗪𝗶𝘁𝗵

• Chrysler 300, Sebring or other Chrysler models
• Crossfire vehicles with a different control-panel configuration
• Units with different rear connectors or control-cable attachments
• Mercedes-Benz applications unless exact interchange has been independently confirmed
• Automatic digital climate-control conversions
• Vehicles requiring a different OEM part number

𝗖𝗼𝗻𝗱𝗶𝘁𝗶𝗼𝗻

Pre-owned genuine OEM component. Normal cosmetic wear, light scratches, dust and installation marks may be present.

The seller states that the listing photographs may show a similar unit rather than the exact item shipped. The received component may vary slightly in cosmetic appearance while matching the listed fitment and function.

𝗪𝗵𝗮𝘁 𝗜𝘀 𝗜𝗻𝗰𝗹𝘂𝗱𝗲𝗱

• One dashboard-mounted A/C and heater control assembly
• Attached knobs, buttons and temperature rollers
• Only the components physically attached to the supplied unit

Dashboard trim, wiring, control cables, mounting screws and additional HVAC components are not included unless shown or specifically stated.

𝗜𝗻𝘀𝘁𝗮𝗹𝗹𝗮𝘁𝗶𝗼𝗻

This component is intended to replace an existing Crossfire HVAC control with the same configuration. It is not a conversion kit.

Before installation:

1. Disconnect the battery according to the vehicle service procedure.

2. Compare the replacement part with the original control.

3. Inspect the electrical connector and mechanical cable attachments.

4. Transfer any brackets or hardware not included with the replacement.

5. Connect the cables carefully without bending or changing their adjustment.

6. Test temperature, fan and airflow operation before reinstalling the dashboard trim.

Professional installation is recommended.

𝗕𝘂𝘆𝗲𝗿 𝗩𝗲𝗿𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻

Before ordering, compare:

1. Chrysler or Mercedes part number

2. Front control-panel layout

3. Rear electrical connector

4. Mechanical cable connections

5. Mounting tabs and screw locations

6. Knob, button and temperature-roller configuration

7. Vehicle VIN and original equipment

Vehicle year and model alone do not guarantee fitment. Matching the original part number and physical configuration is the most reliable method.