16-Pin OBD2 Female Connector Pigtail Cable – 30 cm Open Wire Leads

Repair or build a diagnostic-port connection with this 30 cm 16-pin OBD2 female connector pigtail. The female socket connects to a compatible diagnostic-tool plug, while the open wire ends allow connection to an existing harness or custom test setup.

Product Details

• Condition: New
• Connector: 16-pin OBD-II female socket
• Opposite end: Open wire leads for custom wiring
• Cable length: Approximately 30 cm / 11.8 inches
• Wire gauge: 18 AWG, as specified by the supplier
• Maximum current: 5 A, as specified by the supplier
• Unbranded replacement connector cable

Applications and Compatibility

Suitable for diagnostic-socket repairs, replacement wiring, and custom bench-test harnesses where this connector and wiring arrangement are appropriate. Compare the connector shape and verify every required pin connection against the vehicle or equipment wiring diagram before installation.

This is a passive connector cable. It does not convert communication protocols, add OBD-II capability to a vehicle, or guarantee compatibility between an older vehicle and a modern scan tool.

Installation

Custom wiring is required. Confirm pin assignments by continuity testing; do not rely on wire color alone. Make secure, insulated connections using a suitable wiring method.

Package Contents

• 1 × 30 cm 16-pin OBD2 female connector with open wire leads

Diagnostic scanner, software, and additional adapters are not included.