LCD Display Repair Service for Raymarine RayPilot 650 RP650 Control Head M81100
If you are experiencing a Fading Display, Missing Segments or a Sun-Damaged LCD on your Raymarine / Raytheon RayPilot 650 RP650 marine instrument, it is time to restore a clear, readable display! This listing is for the purchase of (1) REPAIR SERVICE to replace the LCD in your original compatible instrument. You must mail your instrument to us for repair. A complete replacement instrument is not included.
Why replace your original equipment when its display can be repaired? The internal LCD and conductive contact strips will be replaced with Brand New replacement components while retaining your original instrument electronics, housing, keypad and rotary course control. LCD replacement does not normally require programming; existing calibration and SeaTalk configuration remain on the original circuit board unless the instrument is reset.
Typical Problems That Require Our Service:
- Faded or low-contrast display characters
- Missing or distorted segments caused by a defective LCD
- Sunburned, darkened or discolored LCD
- Blotches or damage within the LCD glass
- Display becomes difficult to read as it warms up
- Note: This service covers LCD replacement only. Power faults, circuit board failures, water damage or corrosion, backlight faults, keypad faults, SeaTalk communication problems, NMEA communication problems, course-computer faults, heading or rudder-sensor faults, hydraulic pump or mechanical drive faults, steering faults and incorrect autopilot calibration are not included.
Service is for the Following Models:
- Raymarine / Raytheon - RayPilot 650 and RP650 autopilot control heads
- Reference control-head assembly: M81100, subject to physical LCD fitment verification
Please compare your instrument with the listing photos. Confirm the RayPilot 650 / RP650 model and M81100 identification, LCD segment layout, glass shape, dimensions and electrical contact positions. This service does not cover ST6000, ST6000+, ST6001, ST6001+, ST6002, ST7000, p70, p70R or Evolution control heads. M81100 identifies the complete control head, not the individual LCD.
HOW DOES THIS SERVICE WORK?
1.. Use Add To Cart to purchase the service.
2.. Disconnect vessel power, then carefully remove your RayPilot control head following the manufacturer's instructions. Professional marine-electronics removal is recommended.
3.. Disconnect and label the instrument connections. Securely package the complete instrument and mail it to us. Do not send the course computer, sensors, steering drive or vessel wiring.
You will receive mailing instructions via email after the service is purchased and paid for. Ship your securely packaged instrument using FedEx, UPS, DHL, US Post Office or another suitable carrier. Please include your order number, a short list of symptoms and your return mailing address.
Note: Do not use the autopilot with its control head removed or defective. Follow the emailed mailing instructions before shipping.
Mailing Address
German Audio Tech
Attn: Repair Dept.
65 Pine Ave., #337
Long Beach, CA 90802
