1.5 Ton Aluminum teel Floor Jack Dual Pump Hydraulic Low Profile Car Jack

𝗣𝗿𝗼𝗱𝘂𝗰𝘁 𝗗𝗲𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻

Lift low-clearance passenger vehicles quickly and conveniently with this compact 1.5-ton hydraulic floor jack. Its aluminum-and-steel construction offers a practical combination of strength, stability and portability, while the dual-piston pump helps bring the saddle to the vehicle’s lifting point with fewer handle strokes.

A minimum saddle height of approximately 3.3 inches provides access beneath many sports cars, coupes, sedans and other low-profile vehicles. The jack raises to approximately 14.1 inches for tire changes, brake service, inspections and routine garage maintenance.

𝗣𝗿𝗼𝗱𝘂𝗰𝘁 𝗗𝗲𝘁𝗮𝗶𝗹𝘀

• Product type: Hydraulic floor jack  
• Manufacturer part number: AL-D150G15  
• Brand: Unbranded  
• Rated capacity: 1.5 tons / 3,000 lb  
• Minimum saddle height: Approximately 3.3 inches  
• Maximum saddle height: Approximately 14.1 inches  
• Lift mechanism: Dual-piston quick-lift hydraulic pump  
• Construction: Aluminum and steel  
• Color: Green, black and silver  
• Handle length: Approximately 37.3 inches  
• Mobility: Two swiveling rear casters and one wide-track front roller  
• Built-in overload and bypass protection  
• Padded handle section helps protect the vehicle during operation  
• Convenient side handles assist with carrying and positioning  
• Condition: New  
• Quantity: One floor jack with handle components  

𝗞𝗲𝘆 𝗙𝗲𝗮𝘁𝘂𝗿𝗲𝘀

• Low 3.3-inch entry height for many low-clearance vehicles  
• Dual-pump design provides faster saddle movement  
• Lightweight aluminum-and-steel hybrid construction  
• Compact size is convenient for home garages, workshops and transport  
• Swiveling rear casters make positioning beneath the vehicle easier  
• Wide front roller improves tracking and stability  
• Overload protection helps prevent operation beyond the rated capacity  
• Bypass protection helps prevent hydraulic overextension  

𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀

Suitable for lifting appropriately rated:

• Sports cars and coupes  
• Compact cars  
• Sedans and hatchbacks  
• Small passenger vehicles  
• Some ATVs or utility vehicles when used with the correct manufacturer-approved lifting point or adapter  
• Vehicles requiring a jack with approximately 3.3 inches of entry clearance  

This is a universal service tool rather than a vehicle-specific replacement part. Before purchasing, verify the vehicle’s weight, designated lifting-point height and required lifting height. This jack may not provide sufficient capacity or lift height for trucks, large SUVs, commercial vehicles or other heavy vehicles.

𝗜𝗺𝗽𝗼𝗿𝘁𝗮𝗻𝘁 𝗦𝗮𝗳𝗲𝘁𝘆 𝗜𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝗼𝗻

• Never exceed the marked 3,000 lb rated capacity.  
• Use only on a hard, level and stable surface.  
• Consult the vehicle owner’s manual and lift only at approved jacking points.  
• Center the saddle beneath the lifting point before raising the vehicle.  
• A floor jack is a lifting device only. Never work beneath a vehicle supported solely by the jack.  
• After lifting, immediately support the vehicle with properly rated jack stands.  
• Chock the wheels that remain on the ground and apply the parking brake.  
• Inspect the jack before every use and discontinue use if it is leaking, damaged or operating abnormally.  
• Follow the supplied operating and hydraulic bleeding instructions before initial use.

𝗛𝗮𝗻𝗱𝗹𝗲 𝗜𝗻𝘀𝘁𝗮𝗹𝗹𝗮𝘁𝗶𝗼𝗻

Before operation, loosen the handle-retaining bolt, fully insert the handle into its socket and securely retighten the bolt. Confirm that the handle cannot pull free before lifting a vehicle.

𝗣𝗮𝗰𝗸𝗮𝗴𝗲 𝗜𝗻𝗰𝗹𝘂𝗱𝗲𝘀

• One 1.5-ton hydraulic floor jack  
• Handle components  
• Items shown in the listing photographs  

Please compare the specifications and photographs with your intended application before ordering.