{"product_id":"lcd-display-screen-for-raymarine-autopilot-smartpilot-st6001-e12098-e12100","title":"LCD Display Screen for Raymarine Autopilot SmartPilot ST6001 E12098 E12100","description":"\u003cp\u003eRestore a faded, damaged, or unreadable autopilot display with this replacement LCD screen for compatible Raymarine, Raytheon, and Autohelm ST6001 control heads.\u003c\/p\u003e\n\u003cp\u003eThis listing is for the internal LCD screen and two conductive strips only. It is not a complete autopilot control head or autopilot system.\u003c\/p\u003e\n\u003cp\u003e𝗣𝗿𝗼𝗱𝘂𝗰𝘁 𝗗𝗲𝘁𝗮𝗶𝗹𝘀\u003c\/p\u003e\n\u003cp\u003e• Product type: Replacement autopilot LCD screen  \u003cbr\u003e• Application: Marine autopilot control-head repair  \u003cbr\u003e• Display type: Monochrome segmented LCD  \u003cbr\u003e• Connection method: Conductive elastomer strips  \u003cbr\u003e• Condition: New  \u003cbr\u003e• Installation position: Inside the ST6001 control head  \u003cbr\u003e• Brand: Aftermarket replacement component  \u003cbr\u003e• Soldering: Normally not required for the LCD connection  \u003cbr\u003e• Instructions: Seller states that an English replacement guide is available after purchase  \u003c\/p\u003e\n\u003cp\u003e𝗙𝗶𝘁𝗺𝗲𝗻𝘁 𝗔𝗻𝗱 𝗖𝗼𝗺𝗽𝗮𝘁𝗶𝗯𝗶𝗹𝗶𝘁𝘆\u003c\/p\u003e\n\u003cp\u003eDesigned for compatible versions of:\u003c\/p\u003e\n\u003cp\u003e• Raymarine ST6001 autopilot control head  \u003cbr\u003e• Raytheon ST6001 autopilot control head  \u003cbr\u003e• Autohelm ST6001 autopilot control head  \u003cbr\u003e• Surface-mounted ST6001 control head E12098  \u003cbr\u003e• Flush-mounted ST6001 control head E12100  \u003c\/p\u003e\n\u003cp\u003eCompatibility is determined by the control-head model and internal LCD configuration—not the vessel’s year, make, or model.\u003c\/p\u003e\n\u003cp\u003e𝗥𝗲𝗳𝗲𝗿𝗲𝗻𝗰𝗲 𝗡𝘂𝗺𝗯𝗲𝗿𝘀\u003c\/p\u003e\n\u003cp\u003e• E12098 – ST6001 surface-mount control head  \u003cbr\u003e• E12100 – ST6001 flush-mount control head  \u003cbr\u003e• E12107 – Complete SmartPilot S1 hydraulic outboard system originally supplied with an ST6001 control head  \u003c\/p\u003e\n\u003cp\u003eE12107 identifies a complete autopilot package rather than the LCD or individual control head.\u003c\/p\u003e\n\u003cp\u003e𝗥𝗲𝗹𝗮𝘁𝗲𝗱 𝗦𝘆𝘀𝘁𝗲𝗺 𝗣𝗮𝗰𝗸𝗮𝗴𝗲𝘀\u003c\/p\u003e\n\u003cp\u003eThe ST6001 control head was also included in several other Raymarine SmartPilot packages, including:\u003c\/p\u003e\n\u003cp\u003e• E12106 – S1 hydraulic inboard system with ST6001  \u003cbr\u003e• E12107 – S1 hydraulic outboard system with ST6001  \u003cbr\u003e• E12108 – S1 linear-drive system with ST6001  \u003cbr\u003e• E12120 – S1G hydraulic inboard system with ST6001  \u003cbr\u003e• E12122 – S1G hydraulic outboard system with ST6001  \u003cbr\u003e• E12124 – S1G linear-drive system with ST6001  \u003c\/p\u003e\n\u003cp\u003eThese package numbers are provided only as identification references. Confirm that the installed controller is an ST6001 with the correct internal display before ordering.\u003c\/p\u003e\n\u003cp\u003e𝗡𝗼𝘁 𝗖𝗼𝗻𝗳𝗶𝗿𝗺𝗲𝗱 𝗙𝗼𝗿\u003c\/p\u003e\n\u003cp\u003e• ST6000 control head  \u003cbr\u003e• ST6000+ control head  \u003cbr\u003e• ST6001+ control head  \u003cbr\u003e• ST6002 control head  \u003cbr\u003e• ST7000, ST7001, or ST7002 control heads  \u003cbr\u003e• ST8001 or ST8002 rotary control heads  \u003cbr\u003e• ST70, p70, or p70s controllers  \u003cbr\u003e• Any unit with a different LCD contact or segment arrangement  \u003c\/p\u003e\n\u003cp\u003eThe seller offers a separate replacement display for ST6000+ and ST6001+ units. Do not assume that the plus and non-plus displays are interchangeable.\u003c\/p\u003e\n\u003cp\u003e𝗜𝗺𝗽𝗼𝗿𝘁𝗮𝗻𝘁 𝗖𝗼𝗺𝗽𝗮𝘁𝗶𝗯𝗶𝗹𝗶𝘁𝘆 𝗖𝗵𝗲𝗰𝗸\u003c\/p\u003e\n\u003cp\u003eBefore ordering, open the original control head and compare:\u003c\/p\u003e\n\u003cp\u003e• LCD shape and dimensions  \u003cbr\u003e• Display-segment and icon arrangement  \u003cbr\u003e• Contact locations  \u003cbr\u003e• Conductive-strip positions  \u003cbr\u003e• Internal reflector and surround design  \u003cbr\u003e• Model and product number on the rear identification label  \u003c\/p\u003e\n\u003cp\u003eDo not order solely from the appearance of the front panel. Similar Raymarine control heads can use different internal displays.\u003c\/p\u003e\n\u003cp\u003e𝗖𝗼𝗺𝗺𝗼𝗻 𝗣𝗿𝗼𝗯𝗹𝗲𝗺𝘀 𝗧𝗵𝗶𝘀 𝗣𝗮𝗿𝘁 𝗠𝗮𝘆 𝗥𝗲𝗽𝗮𝗶𝗿\u003c\/p\u003e\n\u003cp\u003e• Faded or unreadable characters  \u003cbr\u003e• Missing display segments caused by LCD failure  \u003cbr\u003e• Intermittent segments caused by deteriorated conductive strips  \u003cbr\u003e• Darkened or discolored LCD  \u003cbr\u003e• Sun and heat damage  \u003cbr\u003e• Delaminated display layers  \u003cbr\u003e• Internal bubbles, wrinkles, or blotches  \u003cbr\u003e• Cracked LCD glass  \u003cbr\u003e• Poor contrast that remains after adjustment  \u003c\/p\u003e\n\u003cp\u003e𝗧𝗵𝗶𝘀 𝗣𝗮𝗿𝘁 𝗪𝗶𝗹𝗹 𝗡𝗼𝘁 𝗥𝗲𝗽𝗮𝗶𝗿\u003c\/p\u003e\n\u003cp\u003e• A control head that does not power on  \u003cbr\u003e• Failed circuit board or power-supply components  \u003cbr\u003e• Defective keypad or buttons  \u003cbr\u003e• Failed illumination or backlighting  \u003cbr\u003e• SeaTalk or NMEA communication problems  \u003cbr\u003e• Course-computer or software faults  \u003cbr\u003e• Defective compass, rudder sensor, or drive unit  \u003cbr\u003e• Water-damaged or corroded electronics  \u003cbr\u003e• Damaged external wiring or connectors  \u003c\/p\u003e\n\u003cp\u003eMissing or intermittent segments can also result from contaminated contacts, incorrectly positioned conductive strips, inadequate assembly pressure, or PCB damage. Diagnose the original control head before ordering.\u003c\/p\u003e\n\u003cp\u003e𝗜𝗻𝘀𝘁𝗮𝗹𝗹𝗮𝘁𝗶𝗼𝗻\u003c\/p\u003e\n\u003cp\u003eInstallation requires disassembling the control head and accurately positioning the replacement LCD and conductive strips.\u003c\/p\u003e\n\u003cp\u003e• Disconnect vessel power before servicing  \u003cbr\u003e• Use electrostatic-discharge protection  \u003cbr\u003e• Photograph the original component positions  \u003cbr\u003e• Avoid touching the LCD contact surfaces  \u003cbr\u003e• Clean the contact areas using an electronics-safe method  \u003cbr\u003e• Align both conductive strips evenly  \u003cbr\u003e• Confirm correct placement of the reflector and display surround  \u003cbr\u003e• Tighten the housing evenly without overtightening  \u003cbr\u003e• Inspect the case seal and mounting gasket  \u003cbr\u003e• Test every display segment and control function before final installation  \u003c\/p\u003e\n\u003cp\u003eOpening the control head may compromise its weather seal. Replace deteriorated sealing components and ensure the housing is properly sealed before returning the unit to marine service.\u003c\/p\u003e\n\u003cp\u003eProfessional installation is recommended if you are unfamiliar with marine instrument repair.\u003c\/p\u003e\n\u003cp\u003e𝗣𝗮𝗰𝗸𝗮𝗴𝗲 𝗜𝗻𝗰𝗹𝘂𝗱𝗲𝘀\u003c\/p\u003e\n\u003cp\u003e• One replacement LCD screen  \u003cbr\u003e• Two conductive elastomer strips  \u003c\/p\u003e\n\u003cp\u003e𝗡𝗼𝘁 𝗜𝗻𝗰𝗹𝘂𝗱𝗲𝗱\u003c\/p\u003e\n\u003cp\u003e• Complete ST6001 control head  \u003cbr\u003e• Front fascia, keypad, or housing  \u003cbr\u003e• Reflector, diffuser, or LCD surround  \u003cbr\u003e• Main circuit board  \u003cbr\u003e• Illumination or backlight components  \u003cbr\u003e• Case seal or mounting gasket  \u003cbr\u003e• Course computer, compass, rudder sensor, or drive unit  \u003cbr\u003e• SeaTalk cables, mounting hardware, or tools  \u003c\/p\u003e\n\u003cp\u003e𝗦𝗮𝗳𝗲𝘁𝘆 𝗡𝗼𝘁𝗶𝗰𝗲\u003c\/p\u003e\n\u003cp\u003eAn autopilot is a navigation aid and must not replace attentive supervision at the helm. After repair, test the display, buttons, alarms, standby function, course-change controls, and steering response before returning the autopilot to normal service.\u003c\/p\u003e","brand":"German Audio Tech","offers":[{"title":"Default Title","offer_id":67660470943857,"sku":"E12100","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0366\/7093\/files\/exec-c5e8faac-f723-4711-9dce-4123d6cb5a19.png?v=1791867648","url":"https:\/\/www.germanaudiotech.com\/products\/lcd-display-screen-for-raymarine-autopilot-smartpilot-st6001-e12098-e12100","provider":"German Audio Tech","version":"1.0","type":"link"}