{"product_id":"6-pin-rear-backup-reverse-camera-for-2011-2012-ford-edge-bt4z-19g490-b","title":"6-Pin Rear Backup Reverse Camera for 2011-2012 Ford Edge BT4Z-19G490-B","description":"\u003cp\u003eReplace a failed, intermittent, distorted, or black-screen factory rearview camera with this new aftermarket replacement. Designed for compatible Ford Edge factory backup-camera systems, this unit installs in the original rear liftgate camera location and connects to the existing wiring through its factory-style 6-pin connector.\u003c\/p\u003e\n\u003cp\u003e𝗣𝗿𝗼𝗱𝘂𝗰𝘁 𝗗𝗲𝘁𝗮𝗶𝗹𝘀\u003c\/p\u003e\n\u003cp\u003e• Product type: Rearview backup parking camera  \u003cbr\u003e• Condition: New  \u003cbr\u003e• Brand: Aftermarket replacement  \u003cbr\u003e• Placement: Rear liftgate  \u003cbr\u003e• Connection: Wired factory-style 6-pin connector  \u003cbr\u003e• Camera type: Color camera  \u003cbr\u003e• Housing color: Black  \u003cbr\u003e• Intended use: Replacement for an existing factory-installed camera system  \u003cbr\u003e• Installation style: Direct-style replacement; no universal wiring harness included  \u003c\/p\u003e\n\u003cp\u003e𝗣𝗮𝗿𝘁 𝗡𝘂𝗺𝗯𝗲𝗿𝘀\u003c\/p\u003e\n\u003cp\u003e• Replacement part number: BT4Z-19G490-B  \u003cbr\u003e• Alternate format: BT4Z19G490B  \u003cbr\u003e• Replaces earlier Ford number: BT4Z-19G490-A  \u003cbr\u003e• Additional marking shown on this aftermarket camera: FL1T-19G490-B  \u003c\/p\u003e\n\u003cp\u003eThe FL1T number is a manufacturer marking shown on the aftermarket unit. Buyers should use BT4Z-19G490-B and the connector shown in the photographs as the primary compatibility references.\u003c\/p\u003e\n\u003cp\u003e𝗖𝗼𝗺𝗽𝗮𝘁𝗶𝗯𝗶𝗹𝗶𝘁𝘆\u003c\/p\u003e\n\u003cp\u003e• 2011 Ford Edge equipped with a factory rearview camera  \u003cbr\u003e• 2012 Ford Edge equipped with a factory rearview camera  \u003cbr\u003e• Certain early-production 2013 Ford Edge vehicles built through October 23, 2012  \u003c\/p\u003e\n\u003cp\u003eCompatible trims may include SE, SEL, Limited, and Sport when originally equipped with the matching factory camera system. Compatibility depends on the vehicle build date, original camera number, connector, and equipment—not engine size alone.\u003c\/p\u003e\n\u003cp\u003e𝗜𝗺𝗽𝗼𝗿𝘁𝗮𝗻𝘁 𝗙𝗶𝘁𝗺𝗲𝗻𝘁 𝗡𝗼𝘁𝗲𝘀\u003c\/p\u003e\n\u003cp\u003e• Not recommended for 2013 vehicles built on or after October 24, 2012; these generally use ET4Z-19G490-A or a related later camera.  \u003cbr\u003e• Not confirmed for 2014 or 2015 Ford Edge models under BT4Z-19G490-B.  \u003cbr\u003e• This camera replaces an existing factory camera; it will not add a backup-camera system to a vehicle that was not originally equipped with one.  \u003cbr\u003e• Compare the original part number, housing, lens position, mounting points, and 6-pin connector with the listing photographs before ordering.  \u003cbr\u003e• Vehicle configuration or camera calibration may be required to restore factory parking guidelines or other display functions.  \u003cbr\u003e• Image orientation and parking-guideline operation can vary when an incorrect camera version is installed.\u003c\/p\u003e\n\u003cp\u003e𝗣𝗮𝗰𝗸𝗮𝗴𝗲 𝗜𝗻𝗰𝗹𝘂𝗱𝗲𝘀\u003c\/p\u003e\n\u003cp\u003e• One rearview backup camera  \u003c\/p\u003e\n\u003cp\u003eNo mounting hardware, wiring harness, display, trim panel, or programming service is included unless specifically pictured.\u003c\/p\u003e\n\u003cp\u003e𝗜𝗻𝘀𝘁𝗮𝗹𝗹𝗮𝘁𝗶𝗼𝗻\u003c\/p\u003e\n\u003cp\u003eProfessional installation is recommended. Disconnect the vehicle battery as directed by the manufacturer, replace the original liftgate camera, reconnect the factory wiring, and verify image orientation and guideline operation before completing reassembly.\u003c\/p\u003e\n\u003cp\u003e𝗕𝗲𝗳𝗼𝗿𝗲 𝗢𝗿𝗱𝗲𝗿𝗶𝗻𝗴\u003c\/p\u003e\n\u003cp\u003ePlease match BT4Z-19G490-B, your vehicle’s production date, and the original connector to the photographs. Supplying the VIN to a Ford parts department is the most reliable way to confirm compatibility.\u003c\/p\u003e","brand":"German Audio Tech","offers":[{"title":"Default Title","offer_id":67596502597745,"sku":"FL1T-19G490-B","price":74.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0366\/7093\/files\/exec-b2b9e741-91b5-49a2-a39e-87c8d3bd19aa.png?v=1790827082","url":"https:\/\/www.germanaudiotech.com\/products\/6-pin-rear-backup-reverse-camera-for-2011-2012-ford-edge-bt4z-19g490-b","provider":"German Audio Tech","version":"1.0","type":"link"}